Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 882
ReTx/OOO/SloSt/DupAck: 0 / 0 / 0 / 0, Tunnel: VE-Port:8/27 idx:11, DP1
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 882 highlights
portShow 858 Uptime : 50m13s Stats Duration : 35m19s Receiver Stats : 846212584 bytes / 4594438 pkts / 560.99 KBps Avg Sender Stats : 216803637504 bytes / 29122536 pkts / 144.36 MBps Avg TCP Bytes In/Out : 3135072280 / 223666014748 ReTx/OOO/SloSt/DupAck: 0 / 0 / 0 / 0 RTT (min/avg/max) : 1 / 1 / 1 ms Wan Util : 26.3% TxQ Util : 0.0% To display an FCIP tunnel with FICON disabled: switch:admin> portshow fciptunnel 8/26 -d Tunnel: VE-Port:8/26 (idx:10, DP1) Oper State : Disabled TID : 218 Flags : 0x00000000 IP-Extension : Disabled Compression : None QoS BW Ratio : 50% / 30% / 20% Fastwrite : Disabled Tape Pipelining : Disabled IPSec : Disabled Load-Level (Cfg/Peer): Failover (Failover / Failover) Local WWN : 10:00:00:05:33:e7:d2:11 Peer WWN : 00:00:00:00:00:00:00:00 RemWWN (config) : 00:00:00:00:00:00:00:00 cfgmask : 0x000004ff 0x40000208 Flow Status : 0 ConCount/Duration : 0 / 1h6m7s Uptime : 0s Stats Duration : 0s Receiver Stats : 0 bytes / 0 pkts / 0.00 Bps Avg Sender Stats : 0 bytes / 0 pkts / 0.00 Bps Avg TCP Bytes In/Out : 0 / 0 ReTx/OOO/SloSt/DupAck: 0 / 0 / 0 / 0 RTT (min/avg/max) : 0 / 0 / 0 ms Wan Util : 0.0% TxQ Util : 0.0% To display an FCIP tunnel with additional circuit information: switch:admin> portshow fciptunnel 8/27 -d Tunnel: VE-Port:8/27 (idx:11, DP1) Oper State : Online TID : 219 Flags : 0x00000000 IP-Extension : Disabled Compression : None QoS BW Ratio : 50% / 30% / 20% Fastwrite : Enabled Tape Pipelining : Read/Write IPSec : Disabled Load-Level (Cfg/Peer): Failover (Failover / Failover) Local WWN : 10:00:00:05:33:e7:d2:13 Brocade Fabric OS Command Reference 53-1004112-02