Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 250

fabricShow fabricShow Displays fabric membership information. Synopsis fabricshow [-membership | -chassis | -paths | -version] fabricshow -help Description Use this command to display information about switches in the fabric. If the switch is initializing or is disabled, the message "no fabric" is displayed. Running this command on an FCR or edge switch does not provide any router information; running this command on an edge switch with the -membership option does provide router information. If the fabric is reconfiguring, some or all switches may not be displayed; otherwise, the following fields are displayed depending on the command option used: Switch ID The switch Domain_ID and embedded port D_ID. Worldwide Name The switch WWN. Enet IP Addr The switch Ethernet IP address for IPv4- and IPv6-configured switches. For IPv6 switches, only the static IP address displays. FC IP Addr The switch IP FC (IP over Fibre Channel) address. Name The switch symbolic name. An arrow (>) indicates the principal switch. FC Router IP Addr The IP address of the FC Router. This field is empty if the switch is not an FC Router or it the FC Router does not support it. FC Router Name The FC Router symbolic name. This field is empty if the switch is not an FC Router or it the FC Router does not support it. Chassis WWN The world wide name of the chassis. For switches running firmware versions that do not distribute the chassis WWN, this field displays "NA". Chassis Name The name of the chassis. For switches running firmware versions that do not distribute the chassis name, this field displays "NA". Fabric Name If the fabric has an assigned name, the fabric name is displayed at the end of the command output. 226 Brocade Fabric OS Command Reference 53-1004112-02