Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 544

mapsPolicy mapsPolicy Creates and manages MAPS policies. Synopsis mapspolicy --create policy_name mapspolicy --addrule policy_name -rulename rule_name mapspolicy --delrule policy_name -rulename rule_name mapspolicy --enable policy_name mapspolicy --clone existing_policy_name -name new_policy_name mapspolicy --delete policy_name mapspolicy --show policy_name | -summary | -all [-concise] mapspolicy --help Description Use this command to create and manage monitoring policies. A MAPS policy is a set of rules that define thresholds for measures and actions to take when a threshold is triggered. When you enable a policy, all of the rules in the policy are in effect. A switch can have multiple policies. Notes This command requires a Fabric Vision license. Any change to a policy affects only the information stored on the switch. Consequentially, if an active policy is modified, it has to be re-enabled for the modifications to be effective. The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: --create Creates a monitoring policy. policy_name Specifies the name of the policy to be created. The name for the policy must be unique; it is case-sensitive and can contain up to 32 characters. --addrule policy_name Adds a rule to the specified user-defined policy. You cannot add a rule to the preconfigured policies. -rulename rule_name Specifies the name of the rule to be added to the policy. --delrule policy_name Deletes a rule from the specified user-defined policy. You cannot delete a rule from the preconfigured policies. -rulename rule_name Specifies the name of the rule to be deleted from the policy. 520 Brocade Fabric OS Command Reference 53-1004112-02