Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 573

msTdDisable msTdDisable Disables the Management Server (MS) topology discovery service. Synopsis mstddisable ["ALL"] Description Use this command to disable the management server topology discovery service on a local switch or an entire fabric. This change takes effect immediately and commits to the configuration database for all affected switches. The change is persistent across power cycles and reboots. Notes Topology Discovery Management requires the attached devices (including attached switches) to support request node identification data (RNID) extended link service (ELS). When an FCS policy is enabled, and this command is issued with the "ALL" operand, it can be issued only from the primary FCS. The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands The following operand is optional: "ALL" Disables the MS topology discovery service throughout the entire fabric. This operand must be enclosed in double quotation marks. Examples SEE ALSO To disable the MS topology discovery service on the local switch only: switch:admin> mstddisable This may erase all NID entries. Are you sure? (yes, y, no, n): [no] y Request to disable MS Topology Discovery Service in progress.... done. *MS Topology Discovery disabled locally. To disable MS topology discovery on all the switches in the fabric: primaryfcs:admin> mstddisable "ALL" This may erase all NID entries. Are you sure? (yes, y, no, n): [no] y Request to disable MS Topology Discovery Service in progress.... done. *MS Topology Discovery disabled locally. *MS Topology Discovery Disable Operation Complete!! msTdEnable, msTdReadConfig Brocade Fabric OS Command Reference 549 53-1004112-02