Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1104

switchShow Fabric Name The name assigned to the fabric. The fabric name is set with the fabricName command. HIF Mode Indicates HIF mode of the switch. Values are ON or OFF. The HIF mode can be set using the configure command. Allow XISL Use Allows the switch to use interswitch links (XILS) in the base fabric to carry traffic to this logical switch. Values are ON or OFF. LS Attributes On a switch in Virtual Fabric mode, this field displays logical switch attributes, including the fabric ID associated with the logical switch, the switch role (default switch or base switch), and the fabric Address Mode (0, 2 or 3). If Virtual Fabrics are disabled, only the Address Mode is displayed. The fabric Address Mode value is set by the configure command (Enable a 256 Area Limit). The switch summary is followed by one-line description for non-EX_Ports and one or two lines for EX_Ports: Index Port index is a number between 0 and the maximum number of supported ports on the platform. The port index identifies the port number relative to the switch. Slot Slot number; 1-12. Port Port number; 0-15, 0-31, or 0-63. PortWWN Port world wide name (WWN). Address The 24-bit Address Identifier. Media Media types include the following: -No module present. Applicable to all port types. cu Displays when the copper (default) GbE port ge0 or ge1 is active (refer to portCfgGeMediaType for more information). If the optical GbE port is active and an SFP is installed (copper or optical), "id" is displayed. If nothing is installed on the optical port, the Media field shows "--". The "cu" field also displays for interchassis links (ICLs). id Serial ID. Indicates that an SFP is installed. Use sfpShow to get more information about the SFP, including the serial number. 1080 Brocade Fabric OS Command Reference 53-1004112-02