Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 709

portCfgFlogiLogout portCfgFlogiLogout Enables the Base Device Logout functionality on the port. Synopsis portcfgflogilogout --enable [slot/]port | -all portcfgflogilogout --disable [slot/]port | -all portcfgflogilogout --help Description Use this command to enable or disable Base Device Logout functionality on a specified port or port range. By default, the functionality is disabled on all the ports. This functionality allows NPIV devices to remain logged in even after the base device logs out. A base device is a device on a F_Port which has the base PID. The base device logs in with a FLOGI. The execution of this command is disruptive. The online ports will toggle with this command but prompts for user confirmation if any port is online. You cannot configure the Base Device Logout functionality if the standby device is running on a lower version of the firmware. The feature is not supported on ICL ports. You cannot enable this feature on the ports that do not support NPIV capability or if NPIV is disabled by configuration. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: [slot/]port | -all Specifies a port number. You can specify a port or range of ports. You can use -all to include all ports on the logical switch. --enable Enables Base Device Logout functionality on the specified port. --disable Disables Base Device Logout functionality on the specified port. --help Displays the command usage. Examples SEE ALSO To enable Base Device Logout functionality on a port: switch:admin> portcfgflogilogout --enable 2/1 To disable Base Device Logout functionality on a port: switch:admin> portcfgflogilogout --disable 2/1 portCfgNPIVPort Brocade Fabric OS Command Reference 685 53-1004112-02