Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 772

portChannelShow portChannelShow Displays the port channels from a domain to the remote domains. Synopsis portchannelshow [domain] portchannelshow --help Description Notes Use this command to display information about port channels from a domain to one or all reachable remote domains. The command output includes the following information: # domain(s) in the fabric Total number of domains in the fabric. Local Domain ID The domain number of local switch. Domain The domain number of destination switch. Name The name of the destination switch. WWN The world wide name (WWN) of the destination switch. Port Channel The list of port-channel interfaces. For each trunk, only the port number of the master port is displayed. This field displays "None" during the following conditions: • Policy-Based Routing (PBR) is enabled on the switch. • Traffic Isolation (TI) zone is applied on the egress port. • Port channel is used by 8 Gbps-capable ingress ports. • Port channel contains ICL ports or it is used by other ICL ingress ports. • Port channel is not used by any ingress port. The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: domain Specifies the remote domain to display port channels between the switch in which command is executed to the specified remote domain. You can specify domain in one of the following formats: domain_id Specifies the domain number of destination switch. name Specifies the name of destination switch. wwn Specifies the WWN of destination switch. 748 Brocade Fabric OS Command Reference 53-1004112-02