Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 661
Aggressive, Moderate, Standard, compression, hardware, fast-deflate, deflate, aggr-deflate
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 661 highlights
portCfg -c | --compression compression_level Configures compression on the specified FCIP tunnel. By default, compression is disabled. Specify one of the following values on the FX8-24 blades: none Compression disabled hardware Enable standard compression. moderate Enable moderate compression. aggressive Enable aggressive compression. auto enable auto compression. Automatically adjusts compression level based on the maximum configured tunnel bandwidth. To enable this feature upgrade both ends of the tunnel to Fabric OS v7.0.0. Based on total effective tunnel bandwidth, the compression level will be adjusted as follows: Aggressive Bandwidth less than 512 Mbps Moderate Bandwidth more than 512 Mbps and less than 2 Gbps. Standard Bandwidth more than 2Gbps. Specify one of the following values on the Brocade 7840 switch and the Brocade SX6 extension blade: none Compression disabled. fast-deflate Enable fast-deflate compression. deflate Enable deflate compression. aggr-deflate Enable aggressive deflate compression level. --fc-compression compression_level Configures FC compression on the specified FCIP tunnel. By default, compression is disabled. This operand is supported on the Brocade 7840 switch and the Brocade SX6 extension blade only. Specify one of the following values for compression_level: aggr-deflate Enable aggressive deflate compression level. Brocade Fabric OS Command Reference 637 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/661.png)