Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 416

haDump Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands None Examples SEE ALSO To view information about the High Availability feature status on a Brocade DCX 8510-8: switch:admin> hadump TIME_STAMP: Mar 30 12:57:35.109173 Local CP (Slot 7, CP1): Active, Warm Recovered Remote CP (Slot 6, CP0): Standby, Healthy HA enabled, Heartbeat Up, HA State synchronized CHASSIS Ethernet IP Address: 10.20.114.57 Ethernet Subnetmask: 255.255.240.0 CP0 Ethernet IP Address: 10.20.114.58 Ethernet Subnetmask: 255.255.240.0 Host Name: cp0 Gateway IP Address: 10.20.112.1 CP1 Ethernet IP Address: 10.20.114.59 Ethernet Subnetmask: 255.255.240.0 Host Name: cp1 Gateway IP Address: 10.20.112.1 Backplane IP address of CP0 : 10.0.0.5 Backplane IP address of CP1 : 10.0.0.6 IPv6 Autoconfiguration Enabled: Yes Local IPv6 Addresses: IPv6 Gateways: TIME_STAMP: Mar 30 12:57:37.31282 == Service == chassis0:0(8.0) major: 8 part: 0 lo: 0 role: 2 id: 0 dump: 3 epoch: 3 log: 0 block: 0 bits: 321 recov: 0 index: 14 upper: 14 coldnum: 3 warmnum: 14 stbynum: 4 stat: 4 prevstat: 4 sv_winsz: 64 nscm: 10 == Config == (Output truncated) haFailover, haShow 392 Brocade Fabric OS Command Reference 53-1004112-02