Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 398

fosConfig --disable feature fcr vf ethsw --show Disables a feature on the switch. Valid values for feature include the following: Disables the FC Routing service on the switch. All enabled EX_Ports and VEX_Ports on the switch must be offline for this command to succeed. To use this command to disable the FC Routing service only instead of disabling the switch, issue this command, then change the BB fabric ID using fcrConfigure. When disabling the FCR service, you may encounter the following system messages: "Please disable all EX/VEX_Ports first before running this command." This means that there were EX_Ports or VEX_Ports online when this command was issued. Take these ports offline and try the command again. "FC Routing service is already disabled" -This means that the FC Routing service is already disabled. Disables Virtual Fabrics on the switch. This command prompts for confirmation, because the chassis reboots after this command is executed. Disables the Ethernet switch service. Ethernet switching is disabled by default. This operation reboots the switch and is therefore disruptive. Displays the current operating status of features on the switch. Examples To display the operating status of the services on a Brocade 6510: switch:admin> fosconfig --show FC Routing service: Virtual Fabric: Ethernet Switch Service: disabled enabled Service not supported on this Platform To disable the FC Routing service: switch:admin> fosconfig --disable fcr FC Routing service is disabled To enable the FC Routing service: switch:admin> fosconfig --enable fcr FC Routing service is enabled To enable Virtual Fabrics: switch:admin> fosconfig --enable vf WARNING: This is a disruptive operation that \ requires a reboot to take effect. All EX ports will be disabled upon reboot. Would you like to continue [Y/N]y 374 Brocade Fabric OS Command Reference 53-1004112-02