Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 215

enclosureShow enclosureShow Displays attributes of the switch enclosure. Synopsis enclosureshow attribute Description Use this command to display attributes of the switch enclosure, including the vendor-specific enclosure identifier and the identifier of the enclosure interface to which the switch is attached. This command applies to products that are embedded in a blade server or storage chassis. Most options are platform-specific. Options that do not apply to a platform are identified with a "Not supported on this platform" message. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operand: attribute Specifies the enclosure attribute. Valid attributes include the following: id The vendor-specific enclosure identifier. modelname The vendor-specific enclosure model name. slotid The identifier of the enclosure interface to which the switch is attached. rackname The name assigned by the enclosure manager to the rack. rackid The serial number assigned by the enclosure manager to the rack. enclosurename The name assigned by the enclosure manager to the enclosure. enclosureid The serial number assigned by the enclosure manager to the enclosure. connname The product name used by the enclosure manager for the switch model. connaddr The connector address used by the enclosure manager for this switch (indicates the physical position of the switch in the enclosure). connid The serial number of the switch used by the enclosure manager (not to be confused with the Factory Serial Number). Brocade Fabric OS Command Reference 191 53-1004112-02