Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 379
SCSIRead, SCSIWrite, SCSIRW, SCSI2Reserve, scsicmdsts, ABTS, BAACC, SCSITur, SCSI2ReserveRelease
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 379 highlights
flow -frametype type Specifies the predefined frame type. Valid values for type include the following: SCSI, SCSIRead, SCSIWrite, SCSIRW, SCSI2Reserve, SCSI3Reserve, scsicmdsts, ABTS, BAACC, SCSI2Release, SCSI3Release, SCSITur, SCSI2ReserveRelease, SCSI3ReserveRelease, SCSIGoodStatus, SCSICheckStatus, SCSIResvConflict, SCSIInquiry, SCSIXferrdy, Srr, and BARJT. This operand is not supported by the Flow Generator feature. config_options Specifies the flow configuration options. -bidir Configures the features to act on both incoming and outgoing directions on bidirectional traffic. For example, the Flow Mirror feature mirrors the frames on both directions: traffic originating from the source device and traffic that is destined to the source device. This operand is not supported by the Flow Generator feature. -noactivate Allows a flow to be created, but suppresses activation of a flow. -noconfig Overrides the default behavior, which automatically saves the flow in the persistent configuration when you create a flow. The flow will be lost when the system is rebooted. Examples To create a flow on ingress port (1/10) for traffic from the source device (0x020a00) to the destination device (0x030000) and activate the flow for the Flow Mirror and Flow Monitor features: switch:admin> flow --create myflow1 -feature mirror,monitor -ingrport 1/10 -srcdev 0x020a00 -dstdev 0x030000 To create a flow to monitor SCSI frames going through an egress port: switch:admin> flow --create scsicsflow -feature monitor -egrport 1/9 -frametype scsicheckstatus To create a flow to monitor statistics from a particular source to destination on a specified LUN: switch:admin> flow --create lunflow -feature monitor -srcdev 0x010502 -dstdev 0x030700 -ingrport 1/5 -lun 4 To create a flow from source device (0x010203) to destination device(0x020304) for Flow Generator feature without saving the flow: switch:admin> flow --create myflow2 -feature generator -srcdev 0x010203 -dstdev 0x020304 -ingrport 2/3 -noconfig To create a flow from source device (0x01ba00) to destination device(0x01c000) for Flow Generator feature without activating the flow: switch:admin> flow --create myflow3 -feature generator -srcdev 0x01ba00 -dstdev 0x01c000 -ingrport 2/18 -noactivate Brocade Fabric OS Command Reference 355 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/379.png)