Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 883
Tunnel: VE-Port:8/27 idx:11, DP1, TCP Bytes In/Out
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 883 highlights
portShow Peer WWN : 10:00:00:05:33:65:a8:05 RemWWN (config) : 00:00:00:00:00:00:00:00 FICON : Enabled XRC : Enabled Tape Pipelining : Read/Write Read Block id : Enabled Tin Tir : Enabled DevAck : Enabled Tera Read : Disabled Tera Write : Disabled Print : Disabled FICON Max Read Pipe : 32 FICON Max Write Pipe : 32 FICON Max Read Devs : 16 FICON Max Write Devs : 16 FICON Write Timer : 300 FICON Write Chain : 3200000 FICON OXID Base : 0x8000 FICON Debug Flags : 0x77c90000 cfgmask : 0x003fc7ff 0x40000208 Flow Status : 0 ConCount/Duration : 1 / 35m19s Uptime : 50m13s Stats Duration : 35m19s Receiver Stats : 846212584 bytes / 4594438 pkts / 560.99 KBps Avg Sender Stats : 216803637504 bytes / 29122536 pkts / 144.36 MBps Avg TCP Bytes In/Out : 3135072280 / 223666014748 ReTx/OOO/SloSt/DupAck: 0 / 0 / 0 / 0 RTT (min/avg/max) : 1 / 1 / 1 ms Wan Util : 26.3% TxQ Util : 0.0% To display additional performance parameters on tunnel 1/12 (add -c to display all circuits): switch:admin> portshow fciptunnel 8/27 -c Tunnel: VE-Port:8/27 (idx:11, DP1) Oper State : Online TID : 219 Flags : 0x00000000 IP-Extension : Disabled Compression : None QoS BW Ratio : 50% / 30% / 20% Fastwrite : Enabled Tape Pipelining : Read/Write IPSec : Disabled Load-Level (Cfg/Peer): Failover (Failover / Failover) Local WWN : 10:00:00:05:33:e7:d2:13 Peer WWN : 10:00:00:05:33:65:a8:05 RemWWN (config) : 00:00:00:00:00:00:00:00 FICON : Enabled XRC : Enabled Tape Pipelining : Read/Write Read Block id : Enabled Tin Tir : Enabled DevAck : Enabled Tera Read : Disabled Tera Write : Disabled Print : Disabled Brocade Fabric OS Command Reference 859 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/883.png)