Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1183

zoneAdd zoneAdd Adds a member to the zone or Peer Zone. Synopsis zoneadd "zoneName", "member[;member...]" zoneadd --peerzone "zoneName" -principal "principal[;principal...]" -members "member[;member...]" Description Use this command to add one or more members to an existing zone or Peer Zone. This command changes the defined configuration. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change to become effective, enable the configuration with the cfgEnable command. Target Driven Peer Zones are not allowed to be edited using this command. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: "zoneName" Specify the name of an existing zone. Double quotation marks are optional. "member" Specify a member or list of members to be added. The list must be enclosed in double quotation marks. Members must be separated by semicolons. Members can be specified in one or more of the following ways: • A switch domain and port index number pair; for example, "2, 20". Use switchShow for a listing of valid port index numbers. • Node or port WWN. • Zone alias name. • Zone alias pattern. Use a pattern preceded by the wildcard symbol asterisk (*) to include members in the zone that matches the pattern. --peerzone "zoneName" Specifies the Peer Zone name to which one or more principal or members should be added. -principal "principal" Specify a principal or list of principal members to be added. The list must be enclosed in double quotation marks. Principal members must be separated by semicolons. You can specify either a WWN or D, I; zone alias is not a valid principal member. -members "member" Specify a member or list of members to be added to the Peer Zone. You can specify either a WWN or D, I; zone alias is not a valid member. Brocade Fabric OS Command Reference 1159 53-1004112-02