Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 469

ipSecConfig -enc algorithm Specifies the encryption algorithm. This operand is required. Valid algorithms include the following: 3des_cbc 3DES encryption algorithm blowfish_cbc Blowfish encryption algorithm null_enc Null encryption algorithm aes256_cb AES-256 algorithm -spi number Specifies the security parameter index (SPI) for the SA. This is a user-defined index. Valid SPI numbers consist of numeric characters (0-9). This operand is optional. policy ike Creates or modifies an IKE policy configuration. No subtype is required with this command. The command defines the following IKE policy parameters: IKE version, IP address of the remote entity, IP address of the local entity, encryption algorithm, hash algorithm, PRF algorithm, DH group, authentication method, path and filename of the preshared key. The syntax is as follows: ipsecConfig --add | --modify ike arguments. arguments Valid arguments for policy ike include the following: -tag name Specifies a name for the IKE policy. This is a user-generated name. The name must be between 1 and 32 characters in length, and may include alphanumeric characters, dashes (-), and underscores (_). This operand is required. remote IP_address[/prefixlength] Specifies the peer IPv4 or IPv6 address and prefix. -id identifier Specifies the local identifier. The switch is identified by its IPv4 or IPv6 address. -remoteid identifier Specifies the peer identifier. The remote peer is identified by its IPv4 or IPv6 address. -enc algorithm Specifies the encryption algorithm. Valid encryption algorithms include the following: 3des_cbc DES algorithm blowfish_cbc Blowfish algorithm aes128_cbc AES 128-bit algorithm Brocade Fabric OS Command Reference 445 53-1004112-02