Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 248
switch:admin>, Principal Selection Mode enabled Activate in, next fabric rebuild
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
fabricPrincipal 0x00 Reserved. This value cannot be assigned. 0x01 Highest priority. This is a user-defined value 0x02 Switch was principal prior to sending or receiving a build fabric (BF) request. This value is generated by the switch to initiate a fabric reconfiguration. This value should not be assigned. 0x3 - 0xFE Priority value range. Choose a value in this range to indicate priority. Higher numbers mean lower priority. 0xFF Switch is not capable of acting as a principal switch. This is a user-defined value. Use --enable with a new priority to revert to this condition. -force | -f Forces a fabric rebuild regardless of whether the switch is principal or subordinate. This option is not valid with the --disable command. --disable Disables principal switch selection. This command resets the priority to the default value 0xFE. [-f] mode Sets the principal switch selection mode. Specify 1 to enable principal switch selection mode. Specify 0 to disable principal switch selection mode. Optionally, use the -f operand to force a fabric rebuild. Mode changes take effect when the fabric rebuilds. This operand is optional. Examples To enable a high fabric principal priority setting: switch:admin> fabricprincipal --enable -p 0xff Principal Selection Mode enabled (Activate in \ next fabric rebuild) To disable the principal mode selection: switch:admin> fabricprincipal --disable Principal Selection Mode disabled To display the current mode setting: switch:admin> fabricprincipal -q Principal Selection Mode: Enable To disable the mode setting: switch:admin> fabricprincipal 0 Principal Selection Mode disabled 224 Brocade Fabric OS Command Reference 53-1004112-02