Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 668
D | --remote-ip, portcfg fcipcircuit
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 668 highlights
portCfg 644 --dscp-high dscp Specifies the DSCP value for FC High Priority. The range is 0 to 63. The default value is 0. --dscp-medium dscp Specifies the DSCP value for FC Medium Priority. The range is 0 to 63. The default value is 0. --dscp-low dscp Specifies the DSCP value for FC Low Priority. The range is 0 to 63. The default value is 0. --dscp-ip-high dscp Specifies the DSCP value for IP High Priority. The range is 0 to 63. The default value is 0. This parameter is supported only on Brocade 7840 switch and the Brocade SX6 extension blade. --dscp-ip-medium dscp Specifies the DSCP value for IP Medium Priority. The range is 0 to 63. The default value is 0. This parameter is supported only on Brocade 7840 switch and the Brocade SX6 extension blade. --dscp-ip-low dscp Specifies the DSCP value for IP Low Priority. The range is 0 to 63. The default value is 0. This parameter is supported only on Brocade 7840 switch and the Brocade SX6 extension blade. delete tunnel_ID Deletes the specified extension tunnel. This command deletes all associated circuits created with the fciptunnel or fcipcircuit commands. Use the portShow command to display all tunnels and their associated circuits. fcipcircuit Creates an extension circuit on an existing tunnel. Use this command to configure additional circuits. The circuit-specific parameters are optional. The syntax for portcfg fcipcircuit is as follows: portcfg fcipcircuit [slot/]ve_port option circuit_ID options [arguments] [optional_arguments] The following options and arguments are supported with fcipcircuit: create circuit_ID -D | --remote-ip remote_ip_addr -S | --local-ip local_ip_addr -b | --min-comm-rate value in kbps -B|--max-comm-rate value in kbps [circuit_arguments] Creates an extension circuit. You must specify the following parameters when creating an additional circuit: circuit_ID Specifies a numeric identifier for the circuit. The circuit ID is an integer value between 0-9 for both the Brocade FX8-24, and 0-7 for the Brocade 7840 switch. -D | --remote-ip remote_ip_addr Specifies the IP address for the remote end of the circuit. Brocade Fabric OS Command Reference 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/668.png)