Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 385

flow Description Displays the flow definitions and frame statistics. When used without operand, the --show command displays the list of all flows configured in Flow Vision. The show on demand feature allows you to display the statistics of the features without creating a flow. To display the statistics of the features without creating a flow, you must specify the operands without a flow name and provide a flow definition. The flow will run for a time interval of 6 seconds and the data will be displayed for the specified features. Operands The --show command has the following operands: flow_name Displays the parameters and flow statistics for the specified flow. Specify "all" to display all flows. The following predefined flows are supported: sys_mon_all_fports Used for automatically learning and monitoring the traffic passing through all the online F_Ports in the switch. By default, this flow is in the deactivated state. You can activate this flow using the --activate operand. This flow is supported only with the monitor feature. sys_analytics_vtap Used to mirror frames to a port on a remote domain, which is in IO Analyzer Mode. This flow is supported only with the mirror feature. -feature feature_list Displays the statistics for the specified features. Specify "all" to display statistics of all configured features. Valid values for feature_list include the following: monitor, generator, mirror, and fabinfo. fabinfo Displays the topology data (the summary of all the paths taken by the flows in the flow definition) and the MAPS violations. The flow_name, -lun, -frametype, and -sortby options are not supported with this feature. -allzoned Displays all the zoned devices for a specified port, flow name, or flow definition. port_options Specifies the ingress or egress port options. -ingrport port Specifies the ingress port. The port can be in either [slot/]port or D,I (Domain, Index) format depending on the port mode configured using the -portIdMode operand. -egrport port Specifies the egress port. The port can be in either [slot/]port or D,I format depending on the port mode configured using the -portIdMode operand. -mirrorport port Specifies the port from which mirrored frames exits. The port can be in either [slot/]port or D,I format depending on the port mode configured using the -portIdMode operand. frame_options Specifies the options that represent the content of the FC frame or attributes of the frame. Brocade Fabric OS Command Reference 361 53-1004112-02