Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 179

configure The SNMP attributes are no longer configurable with this command. Use the snmpConfig --set seclevel command to configure SNMP attributes. The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands None Examples To enable XISL use on a logical switch with FID 20: switch:admin> setcontext 20 switch:admin> switchdisable switch:admin> configure Configure... Fabric parameters (yes, y, no, n): [no] y Domain: (1..239) [1] Enable a 256 Area Limit (0 = No, 1 = Zero Based Area Assignment, 2 = Port Based Area Assignment): (0..2) [0] 1 WWN Based persistent PID (yes, y, no, n): [no] Allow XISL Use (yes, y, no, n): [yes]yes R_A_TOV: (4000..120000) [10000] E_D_TOV: (1000.. 5000) [2000] WAN_TOV: (0..30000) [0] MAX_HOPS: (7..19) [7] Data field size: (256..2112) [2112] Sequence Level Switching: (0..1) [0] Disable Device Probing: (0..1) [0] Suppress Class F Traffic: (0..1) [0] Per-frame Route Priority: (0..1) [0] Long Distance Fabric: (0..1) [0] BB credit: (1..27) [16] Disable FID Check (yes, y, no, n): [no] Insistent Domain ID Mode (yes, y, no, n): [no] Disable Default PortName (yes, y, no, n): [no] Display FDMI Host Name (yes, y, no, n): [no] Edge Hold Time(Low(80ms), Medium(220ms), High(500ms) UserDefined(80-500ms): (80..500) [500] Remote Fosexec feature: (on, off): [on] High Integrity Fabric Mode (yes, y, no, n): [no] Virtual Channel parameters (yes, y, no, n): [no] F-Port login parameters (yes, y, no, n): [no] D-Port Parameters (yes, y, no, n): [no] yes Dynamic D-Port (on, off): [on] On Demand D-Port (on, off): [on] RDP Polling Cycle(hours)[0 = Disable Polling]: (0..24) [1] Zoning Operation parameters (yes, y, no, n): [no] RSCN Transmission Mode (yes, y, no, n): [no] Arbitrated Loop parameters (yes, y, no, n): [no] System services (yes, y, no, n): [no] Brocade Fabric OS Command Reference 155 53-1004112-02