Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 964

rootAccess rootAccess Configures root access through CLI. Synopsis rootaccess --set [none | consoleonly | all] rootaccess --show rootaccess --help Description Use this command to display and set root access settings. Use the --set command to configure the root user to login to the switch through console or other interfaces such as SSH, Telnet or Web Tools, or to block root login from the interfaces. By default, access to the root account is allowed through console only. Root account must be enabled for the changes to take effect. If root account is disabled, root login through console or any interface fails with a warning message. By default, root account is disabled. You can enable or disable root account using the userConfig command. When access is changed, root is logged out. Use the --show command to display the current root access settings. Notes The execution of this command is not subject to Virtual Fabric restrictions. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following optional operands: --set Modifies the root access settings. Valid options include the following: none Disables logging in to the switch as root through all interfaces. consoleonly Allows logging in to the switch as root through console only. This is the default setting. all Allows logging in to the switch as root through all interfaces. --show Displays the current root access settings. --help Displays the command usage. Examples To set root access level to 'all': switch:admin> rootaccess --set all 940 Brocade Fabric OS Command Reference 53-1004112-02