Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 530

lsDbShow rem port cost bw type Port number of the port on the other side of the link. Cost of this link. The default cost for a 1 Gbps link is 1,000. The rounded bandwidth of the output link, in Gbps. Always 1. Notes Beginning Fabric OS v7.3.0, the output displays only the lines with a bit set. If a port bitmap does not have any bits set, the output displays as "None" for the first line of the bitmap. The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operand: domain Specifies the domain ID of the LSR to be displayed. This operand is optional; if omitted, the entire link state database is displayed. Examples To display the link state record for a switch: switch:admin> lsdbshow 1 Domain = 1 (self), Link State Database Entry pointer = 0x1096da60 lsrP = 0x109784b0 earlyAccLSRs = 0 ignoredLSRs = 0 lastIgnored = Never installTime = Aug 26 18:20:41.451 lseFlags = 0xa uAllOutIfsP[4] = 0x00000001 uPathCost = 0 uOldHopCount = 0 uHopsFromRoot = 0 uPathCount = 1 mOutIfsP[0] = 0x10000000 parent = 0xf0 mPathCost = 0 mHopsFromRoot = 0 Link State Record: Link State Record pointer = 0x109784b0 lsAge = 321 reserved = 0 type = 1 options = 0x0 lsId = 1 advertiser = 1 incarn = 0x80000185 506 Brocade Fabric OS Command Reference 53-1004112-02