Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 423

haShow Notes This command may not be supported on nonbladed systems. Slot numbers for CP1 and CP0 vary depending on the hardware platform. On the Brocade DCX 8510-8, CP0 is in slot 6 and CP1 is in slot 7. On the Brocade DCX 8510-4, CP0 is in slot 4 and CP1 is in slot 5. On the Brocade X6 Director, CP0 is in slot 1 and CP1 is in slot 2. The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands None Examples To display CP status on a Brocade DCX 8510-8 with a healthy standby CP: switch:admin> hashow Local CP (Slot 7, CP1) : Active, Warm Recovered Remote CP (Slot 6, CP0) : Standby, Healthy HA Enabled, Heartbeat Up, HA State Synchronized To display CP status on a Brocade X6 Director with a healthy standby CP: switch:admin> hashow Local CP (Slot 1, CP0): Active, Cold Recovered Remote CP (Slot 2, CP1): Standby, Healthy HA enabled, Heartbeat Up, HA State synchronized SEE ALSO haDisable, haEnable, haFailover Brocade Fabric OS Command Reference 399 53-1004112-02