Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 108
Operands, Examples
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
bufOpMode Operands This command has the following operands: slot Specifies the slot number. --set [-force | -f] Enables buffer optimized mode on the specified slot. This commands prompts for confirmation before removing any F_Port buffers or long distance configurations on that slot. Use the -force or -f option to execute this command without confirmation. --setall [-force | -f] Enables buffer optimized mode on all slots. All switches on the chassis must be disabled using the chassisDisable command before executing this command. The switch must be rebooted for changes to take effect and therefore this operation is disruptive. The command prompts for confirmation before rebooting the switch. Use the -force or -f option to execute this command without confirmation. --reset Clears buffer optimized mode on the specified slot. --resetall [-force | -f] Clears buffer optimized mode on all slots. The switch must be rebooted for changes to take effect and therefore this operation is disruptive. The command prompts for confirmation before rebooting the switch. Use the -force or -f option to execute this command without confirmation. --show Displays the current buffer optimized mode for the specified slot (On or Off). --showall Displays the current buffer optimized mode for all slots. An asterisk (*) next to the slot configuration status indicates an unsupported blade. Examples To display current buffer optimized mode for a single slot switch:admin> bufopmode --show 12 Slot 12: buffer optimized mode - On To enable buffer optimized mode for a given slot: switch:admin> bufopmode --set 11 The slot must first be powered off to perform this operation switch:admin> bufopmode --reset 12 The slot must first be powered off to perform this operation switch:admin> slotpoweroff 11 switch:admin> slotpoweroff 12 switch:admin> bufopmode --set 12 Buffer optimized mode is turned on for slot 11 switch:admin> bufopmode --reset 12 84 Brocade Fabric OS Command Reference 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/108.png)