Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 365
password, Fabric OS Administrator's Guide, Challenge Response Authentication
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 365 highlights
firmwareDownload user path password -p scp | ftp | sftp -A cra -c -r -lr Specify a user name for FTP or SSH server access. This operand can be omitted, if the firmware is accessible on a local directory, a USB device, or by anonymous FTP server access. A user name other than "anonymous" is required for SSH server access. Specify a fully qualified path for the firmware. Absolute path names may be specified using forward slashes (/). Specify a password. This operand can be omitted, if the firmware is accessible through a local directory or an attached USB device, or if no password is required by the FTP server. This operand is required when accessing an SSH server. In Fabric OS v7.0.0 or later, you can omit the password if the switch is configured as follows: • The switch must be configured with public key authentication. Refer to the sshUtil help page for more information. • You select a secure protocol (SCP or SFTP). • The private key is installed on the switch, and the public key is exported to the remote host. Refer to the Fabric OS Administrator's Guide for configuration procedures. Specify the file transfer protocol. Valid values are ftp (file transfer protocol), sftp (secure file transfer protocol), and scp (secure copy protocol). Values are not case-sensitive. If -p is not specified, firmwareCommit determines the protocol automatically by checking the config.security parameter. Specify the method for protocol. Valid option is cra. Challenge Response Authentication (CRA) is supported only with the SCP protocol. Disables version compatibility checking. By default, firmwareDownload checks if the firmware being downloaded is compatible with other running firmware images in the system. If the firmware version is not compatible, firmwareDownload fails. If this option is specified, version compatibility checking is disabled. Downloads the firmware to the secondary partition only. Downloads the firmware locally to the secondary partition on the CP. Brocade Fabric OS Command Reference 341 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/365.png)