Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 94

authUtil To set the Device policy to passive mode: switch:admin> authutil --policy -dev passive Warning: Activating the authentication policy requires DH-CHAP secrets on both switch and device. Otherwise, the F-port will be disabled during next F-port bring-up. ARE YOU SURE (yes, y, no, n): [no] y Device authentication is set to PASSIVE To set the device authentication policy to "on" mode: switch:admin> authutil --policy -dev on Warning: Activating the authentication policy requires DH-CHAP secrets on both switch and device. Otherwise, the F-port will be disabled during next F-port bring-up. ARE YOU SURE (yes, y, no, n): [no] y Device authentication is set to ON 2008/03/24-23:13:06, [AUTH-1003], 112,, INFO, Stealth_3, Device authentication type has been successfully set to ON To start authentication on E/F_Ports 2, 3, and 4: switch:admin> authutil --authinit 2,3,4 Warning: Initiating the authentication requires either DH-CHAP secrets or PKI certificates depending on the protocol selected. Failed authentication may result in traffic disruption. Authentication will not be initiated on encrypted ports. ARE YOU SURE (yes, y, no, n): [no]y SEE ALSO portShow, secAuthSecret 70 Brocade Fabric OS Command Reference 53-1004112-02