Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 970

secActiveSize secActiveSize Displays the size of the active security database. Synopsis secactivesize Description Use this command to display the size of the active security database. The command also displays the maximum database size. For switches running Fabric OS v6.2.0 and later, the maximum security database size is 1 megabyte per logical switch. With up to eight partitions, the total database size on a chassis can be up to 8 megabytes. On switches that are not Virtual Fabric-capable, the security database is limited to 1 megabyte. For switches running earlier versions of Fabric OS (up to v5.3.0), the maximum size is 256 Kilobytes. Notes The effective security DB size is the lowest supported by the fabric. The presence of a Standby CP that runs an earlier version of the operating system will drop the effective security DB size on an Active CP that runs Fabric OS v6.2.0. The Brocade 200E is unable to handle the maximum DB size supported in v6.2.0 and issues a compact flash warning when the active security database is close to the 1 MB limit. The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands None Examples SEE ALSO To display the size of the active security database: switch:admin> secactivesize Size of security active data: 35 bytes \ (Max 1048576 bytes) secDefineSize, secGlobalShow 946 Brocade Fabric OS Command Reference 53-1004112-02