Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 251

fabricShow Path Count Version The number of currently available paths to the remote domain. The firmware version of the domain. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: -membership Displays fabric membership information with additional details of the FC Router, if present in the fabric. -chassis Displays information about the chassis including chassis WWN and chassis name. -paths Displays the number of paths available to each remote domain. -version Displays firmware version details for each domain. -help Displays the command usage. Examples The following example illustrates a fabric of four switches. The switch named "sw180" is the Principal switch. Three of the switches are configured to run IP over Fibre Channel. The fabric name is configured. switch:admin> fabricshow Switch ID Worldwide Name Enet IP Addr FC IP Addr Name 64:fffc40 10:00:00:60:69:00:06:56 192.168.64.59 192.168.65.59 "sw5" 65:fffc41 10:00:00:60:69:00:02:0b 192.168.64.180 192.168.65.180>"sw180" 66:fffc42 10:00:00:60:69:00:05:91 192.168.64.60 192.168.65.60 "sw60" 67:fffc43 10:00:00:60:69:10:60:1f 192.168.64.187 0.0.0.0 "sw187" The Fabric has 4 switches Fabric Name: mainFabricA To show a mixed fabric with IPv4- and IPv6-configured switches (the fabric name is not configured): switch:admin> fabricshow Switch ID Worldwide Name Enet IP Addr FC IP Addr Name 1:fffc41 10:00:00:60:69:00:02:0b 192.168.64.180 192.168.65.180>"sw180" 1080::8:800:200C:1234/64 2:fffc42 10:00:00:60:69:00:05:91 192.168.64.60 192.168.65.60 "sw60" The Fabric has 2 switches. Brocade Fabric OS Command Reference 227 53-1004112-02