Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 578

nbrStateShow ROUTABLE The port is ready to receive frames. ROUTABLE_WAIT The port is waiting for notification from the neighbor. ROUTABLE_SEND The port is preparing for local route update; negotiates for the necessary locks before updating the routes. ROUTABLE_TIMER The request for one or more locks failed; delay for a short interval before retrying. DONE The port is online and in use. DECOM_START The decommissioning request is sent to the neighbor and waiting for a response. DECOM_WAIT Waiting for neighbor to remove routes using the interswitch link (ISL). DECOM_SEND Preparing to update routes of the local port; negotiates for the necessary before updating the routes. DECOM_TIMER The request for one or more locks failed; delay for a short interval before retrying. DECOM_DONE The local routes are updated; waiting for acknowledgement from the neighbor. DECOM_BLOCK The local routes are updated; the neighbor sent acknowledgement. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: slot For bladed systems only, specify the slot number of the port to display, followed by a slash (/). port Specify the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. This operand is optional; if omitted, all neighbor states are displayed. 554 Brocade Fabric OS Command Reference 53-1004112-02