Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 334

ficonCfg ficonCfg Configures the specified FICON database. Synopsis ficoncfg --set database port ficoncfg --reset database ficoncfg --help Description Use this command to configure a FICON database on a specified port. Refer to ficonShow for a description of the database content. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: port Specifies the port to be configured. You can specify the port by its port index number or by a hexadecimal number that contains the Area field (middle byte) of the three-byte Fibre Channel Port Address. Use switchShow for a listing of valid port index numbers. --set Sets the configuration entry. --reset Resets the configuration entry to its default value. database Specifies the name of the FICON database. The only database currently supported is the following: LIRR Devices registered to receive link incident reports. Examples To set the LIRR database on a port using a decimal index number: switch:user> ficoncfg --set LIRR 27 To reset the LIRR switch:user> ficoncfg --reset LIRR 310 Brocade Fabric OS Command Reference 53-1004112-02