Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 488

killTelnet killTelnet Terminates an open Telnet session. Synopsis killtelnet Description Use this command to terminate an open Telnet session. The command lists all current Telnet and serial port login sessions and information such as session number, login name, idle time, IP address of the connection, and timestamp of when the login session was opened. The command prompts you to specify the number of the session you want to terminate. The list of open sessions displayed with killTelnet includes your current session; be sure not kill your own Telnet session. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Examples To terminate an open Telnet connection: switch:admin> killtelnet Collecting login information....Done List of telnet sessions (3 found) Session No USER TTY IDLE FROM LOGIN@ 0 root0 ttyS0 1:17m - 5:13pm 1 admin0 pts/0 16.00s 192.168.130.29 6:29pm 2 admin0 pts/1 3.00s 192.168.130.29 6:31pm Enter Session Number to terminate (q to quit) 1 Collecting process information... Done. You have opted to terminate the telnet session:- logged in as "admin0 ", from "192.168.130.29 " since " 6:29pm" and has been inactive for "16.00s ", the current command executed being: "-rbash ". The device entry is: "pts/0 ". This action will effectively kill these process(es):- USER PID ACCESS COMMAND /dev/pts/0 root 12868 f.... login root 12869 f.... login root 12877 f.... rbash Please Ensure (Y/[N]): y killing session.... Done! Collecting login information....Done List of telnet sessions (2 found) Session No USER TTY IDLE FROM LOGIN@ 0 root0 ttyS0 1:17m - 5:13pm 1 admin0 pts/1 3.00s 192.168.130.29 6:31pm Enter Session Number to terminate (q to quit) q SEE ALSO None 464 Brocade Fabric OS Command Reference 53-1004112-02