Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 224

errFilterSet errFilterSet Sets a filter for an error log destination. Synopsis errfilterset [-d destination][-v severity] Description Use this command to set a filter for an error log destination. A filter is set based on the severity level of the messages. When used without operands, this command displays the filters that are currently in configured. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: -d destination Specifies the destination for the filter. The string console is the only valid value at this time. -v severity Specifies the minimum severity level of the message to pass through the filter. Valid values are INFO, WARNING, ERROR, or CRITICAL. Input values are not case-sensitive. Examples To display the current filter settings: switch:admin> errfilterset console: filter severity = WARNING SEE ALSO To set the filter severity level for the console: switch:admin> errfilterset -d console -v warning errDump, errShow 200 Brocade Fabric OS Command Reference 53-1004112-02