Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 770
Specifies the Port mode. The, Brocade Native mode.
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 770 highlights
portCfgVEXPort The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: slot On bladed systems only, specifies the slot number followed by a slash (/). port[-port] Specifies a port or a port range, relative to the slot number on bladed systems, for example, 5/17-29. Use switchShow for a list of valid ports. When executed with [slot/]port [-port] only, the command displays the current VEX_Port configuration. -a admin Enables or disables the specified port as a VEX_Port. Valid values are 1 (enable as VEX_Port), 2 (disable as VEX_Port and enable as non-VEX_Port). portCfgDefault may also be used to disable VEX_Ports. -f fabricid Specifies the fabric ID. Valid values are 1-128. -r ratov Specifies the R_A_TOV used for port negotiation. Valid values are 2000 to 120000. This operand is only applicable if the "Fabric Parameter" attribute value is not "Auto Negotiate". -e edtov Specifies the E_D_TOV used for port negotiation. Valid values are 1000 to 60000. This operand is only applicable if the "Fabric Parameter" attribute value is not "Auto Negotiate". -d domainid Specify the preferred domain ID. For Brocade native mode (-m 0). Valid values are 1 to 239. -p pidformat Specifies the Port ID format. Valid values are 0-native, 1-core, 2-extended edge. This operand is applicable only when port mode is set to 0 (native mode). If port mode is not "Brocade Native", the Port ID format displays as "Not applicable". -t fabric_parameter Enables or disables negotiation of the fabric parameters. Valid values are: 1-enable, 2-disable. -m port mode Specifies the Port mode. The -m option enforces the same port mode for all the ports connected to the same edge fabric. If the -m option is selected, the port mode is compared to the online ports. If the modes are different, an error message is displayed, and the command fails. Valid values are as follows: 0 Brocade Native mode. 746 Brocade Fabric OS Command Reference 53-1004112-02