Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 946

portZoneShow portZoneShow Displays the enforced zone type of the F_Ports and FL_Ports of a switch. Synopsis portzoneshow Description Use this command to display the enforced zone type of the F_Ports and FL_Ports of a switch. Output shows virtual port number (decimal), physical port number (decimal), online status, and if online, port type. If the current zone configuration has been disabled by cfgDisable, the fabric is in non-zoning mode, in which all devices see each other. When default zoning is enabled with "No Access" mode, "No Effective configuration: (No Access)" is displayed. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands None Examples To display the zone membership information of ports: switch:user> portzoneshow [OUTPUT TRUNCATED] PORT: 160 (160) Offline PORT: 161 (161) Offline PORT: 162 (162) Offline PORT: 163 (163) Offline PORT: 164 (164) Offline PORT: 165 (165) Offline PORT: 166 (166) Offline PORT: 167 (167) Offline PORT: 168 (168) FL-Port Enforcement: HARD WWN \ defaultHard: 0 IFID: 0x4332000a PORT: 169 (169) Offline PORT: 170 (170) Offline PORT: 171 (171) Offline PORT: 172 (172) Offline PORT: 173 (173) Offline PORT: 174 (174) Offline PORT: 175 (175) Offline PORT: 176 (176) F-Port Enforcement: HARD WWN \ defaultHard: 0 IFID: 0x4342002a PORT: 177 (177) Offline PORT: 178 (178) Offline PORT: 179 (179) Offline PORT: 180 (180) Offline (output truncated) SEE ALSO cfgShow, switchShow 922 Brocade Fabric OS Command Reference 53-1004112-02