Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1196
zoneRemove, A member can be one or more of the following
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1196 highlights
zoneRemove zoneRemove Removes a member and principal (Peer Zone) from a zone. Synopsis zoneremove "zonename", "member[;member...]" zoneremove --peerzone "zonename" -principal "principal[;principal...]" -members "member[;member...]" Description Use this command to remove one or more members from an existing zone, and to remove one or more members or principal members from a Peer Zone. If all members are removed, the zone is deleted. If all members (principal and non-principal members) are removed, the Peer Zone is deleted. If all non-principal members are removed but there is still a principal member, the Peer Zone will still exist. This command changes the defined configuration. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change to become effective, enable the configuration with the cfgEnable command. Target Driven Peer Zones are not allowed to be edited using this command. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: "zonename" Specify the name of the zone from which to remove a member or principal (Peer Zone only). Double quotation marks are optional. "member" Specify a member or a list of members to be removed from the specified zone. The list must be enclosed in double quotation marks. Members must be separated by semicolons. A member can be one or more of the following: • A switch domain and port index pair: for example, "2,20". Use switchShow for a list of valid port index numbers. • A world wide name • A zone alias name • Zone alias pattern. Use a pattern preceded by the wildcard symbol asterisk (*) to include members in the zone that matches the pattern. --peerzone "zonename" Specifies the Peer Zone name from which one or more principal or members are to be removed. 1172 Brocade Fabric OS Command Reference 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/1196.png)