Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1077

supportFtp -t hours -R -e -d Specifies the time interval, in units of hours, at which the server connectivity is checked. The fractional value for time interval is converted to the nearest lower integer value, for example, a value of 6.5 hours is truncated to 6 hours. Clears all supportFtp parameters. Enables auto file transfer. Trace dump files are automatically transferred to a designated FTP server. The server parameters must be set before you can enable auto file transfer. Disables auto file transfer. Examples To set the FTP parameters: switch:admin> supportftp -s -h 1080::8:800:200C:417A \ -u admin -p password -d support -l sftp supportftp: ftp parameters changed. To display the FTP parameters: switch:admin> supportftp Host IP Addr: 1080::8:800:200C:417A User name: admin Remote Dir: support Auto Upload protocol: sftp Auto-FTP: Off To set FTP parameters interactively: switch:admin> supportftp -s Host IP Addr[1080::8:800:200C:417A]:192.168.67.126 User Name[admin]: admin Password[********]:password Remote Dir[support]: Auto upload protocol[ftp]:scp Auto file transfer parameters changed To set the time interval at which the FTP server connectivity is checked: switch:admin> supportftp -t 24 supportftp: ftp check period changed. To enable auto file transfer: switch:admin> supportftp -e support auto file transfer enabled. To disable auto file transfer: switch:admin> supportftp -d support auto file transfer disabled. SEE ALSO supportSave, supportShow, traceDump Brocade Fabric OS Command Reference 53-1004112-02 1053