Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 711

portCfgGE portCfgGE Manages the port configuration of the GbE/10GbE ports. Synopsis portcfgge [slot/] port --set -speed speed portcfgge [slot/] port --set -mediatype media portcfgge [slot/] port --set -channel channel_num portcfgge [slot/] port --set -lan portcfgge [slot/] port --set -wan portcfgge [slot/] port --enable -autoneg portcfgge [slot/] port --disable -autoneg portcfgge [slot/][ port] --show [-lmac] portcfgge --help Description Use this command to manage the port configuration of the GbE/10GbE ports. This command switches the port speed between 1G and 10G or switch the auto-negotiate mode. The auto-negotiate option allows to control auto-negotiate on the PHY for 1G mode. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: slot For bladed systems only, specifies the slot number of the port to be configured, followed by a slash (/). port Specifies the number of the GbE port to be configured. On the Brocade FX8-24 blade, the GbE ports are numbered ge0 - ge9 and 10 GbE ports are numbered xge0 - xge1. On the Brocade 7840 switch and the Brocade SX6 extension blade, 40 GbE ports are numbered ge0 - ge1 and 1G/10GbE ports are numbered ge2 - ge17. Use the switchShow command for a list of valid ports. --set Configures the GE ports. -speed speed Configures the port speed for the GE ports. The valid speeds are 1G or 10G. Brocade Fabric OS Command Reference 687 53-1004112-02