Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 654
N=NoArp PR=Promisc M=Multicast S=StaticArp LU=LinkUp X=Crossport, To delete an IP interface
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 654 highlights
portCfg To create an interface for a failover crossport on a Brocade FX8-24: 1. Configure the interface for the local XGE port (xge0). switch:admin> portcfg ipif 8/xge0 create \ 192.169.0.20 netmask 255.255.255.0 mtu 1500 Operation Succeeded 2. Configure the interface for the nonlocal XGE port (xge1). switch:admin> portcfg ipif 8/xge1 create \ 192.169.0.20 netmask 255.255.255.0 -x Operation Succeeded 3. The IP address 192.168.11.20 will be available for circuits on VE_Ports 22-31 on the Brocade FX8-24 extension blade. The output from portshow ipif for the same address shows the crossport tag. switch:admin> portshow ipif 8/xge0 Port IP Address / Pfx MTU VLAN Flags 8/xge0 192.168.10.20 / 24 1500 n/a U R M 8/xge0 192.168.11.21 / 24 1500 n/a U R M X Flags: U=Up B=Broadcast D=Debug L=Loopback P=Point2Point R=Running N=NoArp PR=Promisc M=Multicast S=StaticArp LU=LinkUp X=Crossport To delete an IP interface: switch:admin> portcfg ipif ge0 delete 192.168.10.20 Operation Succeeded To delete an IP interface for a failover crossport: switch:admin> portcfg ipif 8/xge0 delete 192.168.11.20 -x Operation Succeeded To create a static IP route using an IPv4 destination address, a netmask, and a gateway address: switch:admin> portcfg iproute ge0 create \ 192.42.0.0 netmask 255.255.255.0 192.168.0.250 Operation Succeeded To create a static IP route using IPv6: switch:admin> portcfg iproute ge0 create \ 2010::/64 2000::1:250 Operation Succeeded switch:admin> portshow iproute ge0 Port IP Address / Pfx Gateway Flags ge0 192.168.0.0 / 24 * U C ge0 2000:: / 64 * U C ge0 2000::10 / 128 * U H L 630 Brocade Fabric OS Command Reference 53-1004112-02