Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 135
chassisDisable, bladeDisable, switchShow, switchDisable, switchCfgPersistentEnable
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
chassisDisable chassisDisable Disables all user ports in a chassis. Synopsis chassisdisable [-force] Description Use this command to disable a Virtual Fabric-aware chassis. All Fibre Channel ports are taken offline. This command prompts for confirmation unless the -force option is used. If the chassis is partitioned into logical switches that are part of logical fabrics, the remaining switches in these fabrics reconfigure. As each port is disabled, the front panel LED changes to a slow-flashing amber. You must disable the chassis before making configuration changes or running offline diagnostic tests. Commands that require the chassis to be disabled generate an error message if invoked while the chassis is enabled. It is not necessary to disable a chassis before rebooting or powering off the switch. To disable the ports of a single logical switch, use the switchDisable command. To disable the ports of a single blade, use the bladeDisable command. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands -force Disables the chassis without confirmation. This operand is optional. Examples To disable a chassis: switch:admin> chassisdisable This command can cause disruption to\ multiple logical switches. Are you sure you want to disable all chassis ports now?\ (yes, y, no, n): [no]y SEE ALSO bladeDisable, bladeEnable, chassisEnable, switchShow, switchDisable, switchEnable, switchCfgPersistentEnable, switchCfgPersistentDisable Brocade Fabric OS Command Reference 111 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/135.png)