Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 122

cfgShow cfgShow Displays zone configuration information. Synopsis cfgshow [--ic] ["pattern"] [, mode] cfgshow [--transdiffs] cfgshow [--transdiffsonly] cfgshow --help Description Use this command to display zone configuration information. If no operand is specified, all zone configuration information (both defined and effective) is displayed. If the local switch has an outstanding transaction, this command displays the most recently edited zone configuration that has not yet been saved. If the local switch has no outstanding transaction, this command displays the committed zone configuration. If a pattern is specified, only matching configurations are displayed. • The defined configuration is the complete set of all zone objects that have been defined in the fabric. There can be multiple zone configurations defined, but only one can be enabled at a time. There might be inconsistencies in the definitions, zones, or aliases that are referenced but not defined, or there might be duplicate members. The defined configuration is the current state of the administrator input. • The effective configuration is the single zone configuration that is currently enabled. The devices that an initiator sees in the fabric are based on this configuration. The effective configuration is built when a specific zone configuration is enabled and all error checking has been completed successfully. Use the --transdiffs and --transdiffsonly options to view changes in the current transaction. The command output displays changes in the current transaction by the following notations: • An asterisk(*) before any tag indicates a change in that zone, zone configuration, alias or any other entity in the zone configuration. • A plus(+) before any entity indicates that it is a newly added entity. • A minus(-) before any entity indicates that it is a deleted entity. When this command is executed after a zoning transaction was aborted on the local switch, it displays the following warning message: "Warning: Current Zoning Transaction was aborted. Reason code = Zone Config update received." When default zoning is enabled with "No Access" mode, "No Effective configuration: (No Access)" is displayed. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands The following operands are optional: --ic Displays all zone configuration names for a given pattern without case distinction. 98 Brocade Fabric OS Command Reference 53-1004112-02