Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 296

fcrFabricShow fcrFabricShow Displays the FC Routers on a backbone fabric. Synopsis fcrfabricshow fcrfabricshow --name fcrfabricshow --help Description Use this command to display information about FC Routers that exist in an FC Router backbone fabric. The existing syntax is maintained for IPv6 support. When IPv6 addresses are not configured, the output of fcrFabricShow displays the IPv4 format. Use the --name option to display the fabric name along with EX-port, FID, and switch name. The message "No active FC Routers found" is displayed if no active FC Routers are present on the backbone fabric. The following information is displayed for each FC Router found on the backbone fabric: WWN The world wide name of the FC Router. Domain ID The domain ID of the FC Router. This domain ID is relevant only on the backbone fabric. Info The Ethernet IP address and switch name of the FC Router. When IPv6 addresses are configured, only the static IP address displays for each FC Router found on the backbone fabric. EX_Ports A listing of active EX_Ports for the FC Router and information about these EX_Ports. This information includes: EX_Port The port number for the trunkmaster EX_Port. An asterisk (*) at the end of the line indicates that the EX_Port is a Remote Router Port. FID The fabric ID of the EX_Port. Neighbor Switch Info (WWN, enet IP, name) The WWN, Ethernet IP address, and switch name of the switch attached to the EX_Port. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operand. --name Displays the FC Routers on a backbone fabric with edge fabric names. 272 Brocade Fabric OS Command Reference 53-1004112-02