Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 56
N_Port, count, preferred failover N_Port.
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
ag --delwwnpgmapping PG "WWN [;WWN2;...]" | --all Removes the mapping between the specified device WWNs and the specified port group. The port group is identified by its port group ID. The --all option removes the mapping of all device WWNs currently mapped to the specified port group. The WWN list must be enclosed in double quotation marks. WWNs must be separated by semicolons. The mappings are removed upon execution of this command. --addwwnfailovermapping N_Port "WWN [;WWN2;...]"| --all Maps one or more device WWNs to a preferred failover N_Port. If the N_Port to which the WWNS are mapped is not available or goes down, the device logins fail over to the preferred failover N_Port. The --all option maps all currently mapped device WWNs to the specified failover N_Port. The WWN list must be enclosed in double quotation marks. WWNs must be separated by semicolons. --delwwnfailovermapping N_Port "WWN [;WWN2;...]" | --all Deletes the mapping of one or more device WWNs to a preferred failover N_Port. The --all option deletes the failover mappings of all device WWNs currently mapped to the specified N_Port. The WWN list must be enclosed in double quotation marks. WWNs must be separated by semicolons. --wwnmappingdisable "WWN [;WWN2;...]" | --all Disables one or more device WWN mappings. Use this command if you want to disable the mapping action temporarily without making permanent changes to the mappings. The mappings remain disabled until they are re-enabled or deleted. The --all option disables all currently existing device WWN mappings. --wwnmappingenable "WWN [;WWN2;...]" | --all e-enables one or more previously disabled device WWN mappings. The --all option re-enables all previously disabled device WWN mappings. --wwnmapshow Displays all device WWN mappings. For each device WWN, the command displays the N_Port number to which it is mapped, the secondary (failover) N_Port, and the port group if applicable. The "Current" field shows the port the device is currently using. If the device is not logged in, the field displays "none." If the device is logged in to a port other than the one it is mapped to, the field displays that port. If the device is mapped to a port group, the field displays the number of the port within that port group that the device is currently using. If the device is using a trunk, the field displays which port in that trunk the device is logged in. The "Enabled" field indicates, whether a mapping has been temporarily disabled ("no"), or whether it is in enabled state ("yes"). --reliabilitycounterset count Sets the reliability limit for the preferred N_Port. This parameter controls the number of ONLINE or OFFLINE State Change Notification (SCN) messages a port can receive before becoming unreliable. The range is 10 through 100. The default value is 25. 32 Brocade Fabric OS Command Reference 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/56.png)