Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 557

mapsRule sddq Isolates the slow-drain flows to a low priority VC from the existing VC (medium or high) thus freeing up the resources for the regular flows in the existing VC. The slow drain device quarantine (SDDQ) feature is not supported in the Access Gateway mode. fms Notifies the configured MAPS threshold events to the FICON Management Server (FMS). toggle Enables port toggling to recover a port from bottleneck condition caused by the target device. Port toggle is supported only for the F_Ports. none No actions are allowed on the switch. Specifying this option allows you to turn off all notifications. --create rule_name Creates a monitoring rule and adds it to a specified policy. All the following operands are required: -group group_name Specifies the group containing the elements on which the specified condition is to be evaluated. -monitor ms_name Specifies the monitoring system (MS). -timebase time_base Specifies the time interval between two samples to be compared. -op comparison_operator Specifies the relational operation to be used in evaluating the condition. -value value Specifies the threshold value. -action action Specifies a comma-separated list of actions to be taken if the specified condition is evaluated to be true. -tt timeout Specifies the time window in seconds over which the port is disabled and re-enabled by MAPS to recover from bottleneck condition. The valid range is from 2 to 3600 seconds. This parameter is valid with only the toggle alert option. -qt quiet_time [-unit min | hour | day] Specifies the time interval, in units of minutes, hours, or days, between consecutive alerts. This parameter is valid with only the raslog and email alert options. -qtclear Clears the configured quiet time for the RASLog and e-mail alerts. -policy policy Specifies the user-defined policy to which the rule is to be added. You cannot add a rule to a predefined policy. Brocade Fabric OS Command Reference 533 53-1004112-02