Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 634
portBeacon, switches, in logical switch order.
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 634 highlights
portBeacon Operands This command has the following operands: slot For bladed systems only, specifies the slot number of the port group to display, followed by a slash (/). port Specifies the number of the port to be configured, relative to its slot for bladed systems. Use switchShow for a listing of valid ports. --enable Enables beaconing mode on the specified port. --disable Disables beaconing mode on the specified port. --show Displays the port beaconing mode on the specified port as ON or OFF. --show -all Displays the beaconing ports in slot/port format on the chassis and index format on switches, in logical switch order. --help Displays the command usage. Examples To enable beaconing mode on a port and verify the configuration: switch:admin> portbeacon --enable 2/1 switch:admin> portbeacon --show 2/1 PortBeacon status of : slot 2, port 1 is ON To disable beaconing mode on a port and verify the configuration: switch:admin> portbeacon --disable 2/1 switch:admin> portbeacon --show 2/1 PortBeacon status of : slot 2, port 1 is OFF To display the beaconing ports on a chassis: switch:admin> portbeacon --show -all In FID: 128 PortBeacon enabled port(s): 12/23 12/26 SEE ALSO chassisBeacon, portPeerBeacon, switchBeacon 610 Brocade Fabric OS Command Reference 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/634.png)