Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 324

fcrXlateConfig --show stalexd [importedFID] Displays stale translate domains associated with the specified Fabric ID (1-128). A translate domain becomes stale when the remote edge fabric for which this translate domain was created in the specified edge fabric becomes unreachable. When issued without specifying an imported FID, this command lists all stale translate domains in all edge fabrics connected to the FCR. --delete stalexd importedFID staleXlateDomainID Deletes the specified stale translate domain from the edge fabric specified by its fabric ID. This command must be executed in the FCR that owns the stale translate domain. Examples To display the translate domain configuration and the state of the persistxd parameter: switch:admin> fcrxlateconfig ImportedFid ExportedFid Domain 001 002 004 001 005 003 OwnerDid 000001 N/A XlateWWN N/A N/A Persist XD state: Enabled To set the preferred domain ID of the translate domain created in fabric 2, which represents the remote fabric 3, to a value of 8: switch:admin> fcrxlateconfig 2 3 8 xlate domain already configured, overwrite?(n) y To clear the preferred domain ID of the translate domain created in fabric 2, which represents remote fabric 3: switch:admin> fcrxlateconfig -r 2 3 xlate domain deleted To enable translate domain persistence: fcr:admin> fcrxlateconfig --enable persistxd Persist XD is enabled To disable translate domain persistence: fcr:admin> fcrxlateconfig --disable persistxd Persist XD is disabled To identify and remove stale translate domains in a single backbone multiple FCR configuration: fcr:admin> fcrxlateconfig --show stalexd Imported FID Stale XD Owner Domain 012 002 007 ( this FCR ) 013 002 001 ( other FCR ) 300 Brocade Fabric OS Command Reference 53-1004112-02