Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 268
fcipLedTest, bladeDisable, chassisDisable, extnCfg, portLedTest
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 268 highlights
fcipLedTest fcipLedTest Exercises the GbE port LEDS on the Brocade 7840, FX8-24, and SX6 extension blade. Synopsis fcipledtest [--slot slot | all] Description Use this command to exercise the GbE port LEDs on the Brocade Brocade 7840, FX8-24, and SX6 extension blade. The behavior of this command varies according to platform: • On Brocade FX8-24, this test cycles through the port LEDs by lighting GREEN and then flashing GREEN on all ports for 3 seconds. As the test continues the ports turn AMBER and then flashing AMBER for 3 seconds. The LEDs turn off when the test has finished. • On Brocade 7840, this test cycles all the port LEDs by lighting GREEN on all ports for 3 seconds. The switch will reboot once the test is complete. • On Brocade SX6, this test cycles all the port LEDs by lighting GREEN on all ports for 3 seconds. As the test continues the ports turn AMBER for 3 seconds. The LEDs turn off when the test has finished. The blade will reboot once the test is complete. This diagnostic cannot be run on an operational switch. You must disable the switch using the chassisDisable command before you can run this test. After the command completes, the ATTN LEDs flash amber, indicating that the command has finished and exited. Enable the switch using the chassisEnable command to set the ATTN LEDs back to black. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following operands: --slot slot Tests all GbE ports in the specified slot. This operand is optional. This operand is valid only on chassis-based platforms. all Tests all GbE ports in the chassis. This operand is optional. This operand is valid only on chassis-based platforms. Examples To test the LEDs on slot 4 of Brocade DCX 8510 with an FX8-24 blade. switch:admin> fcipledtest --slot 4 PASSED. SEE ALSO bladeDisable, bladeEnable, chassisDisable, chassisEnable, extnCfg, portLedTest 244 Brocade Fabric OS Command Reference 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/268.png)