Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 1177

zone Examples 1. Specific zone operation commands The following example shows a scenario of an invalid configuration. If you attempt to create a zone z10 with an alias a10, then create a zone with name a10, z10 expects a10 to be an alias and results in an invalid configuration. To validate all zones in the currently enforced zone database: switch:admin> zonecreate z10,a10 switch:admin> zonecreate a10, 1,2 switch:admin> zone --validate Defined configuration: zone: a10 1,2* zone: z10 a10~ Effective configuration: No Effective configuration: (No Access Invalid configuration * - Member does not exist # - Invalid usage of broadcast zone The reason for not being in the current enforcement table could be The device is not online. To delete all references associated with zone member 100,5: switch:admin> zone --expunge"100,5" You are about to expunge one configuration or member. This action could result in removing many zoning configurations recursively. [Removing the last member of a configuration removes the configuration.] Do you want to expunge the member? (yes, y, no, n): [no] yes To validate all zones in the zone database in the current transaction buffer: switch:admin> zone --validate -m 0 Defined configuration: cfg: t_r_a_f_f_i_c_i_s_o_c__fg bluezone; greenzone cfg: ticonfig regzone zone: bluezone 1,1*; 1,2* zone: greenzone 1,1*; 20:01:00:05:1e:01:23:e0* zone: regzone 1,4*; 1,5* zone: t_r_a_f_f_i_c_i_s_o_prop__zn 1,3*; 2,3 Invalid configuration * - Member does not exist # - Invalid usage of broadcast zone Brocade Fabric OS Command Reference 1153 53-1004112-02