Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 439

interfaceShow firstHlo nbstFull &dbRetransList &lsrRetransList &lsrAckList inactTID helloTID dbRtxTID lsrRtxTID inactTo helloTo rXmitTo nCmdAcc nInvCmd nHloIn nInvHlo Time of the first hello sent on this interface. Time of the last finishing state, NB_ST_FULL, on this interface. Pointer to the database retransmission list. Pointer to the link state records (LSR) retransmission list. Pointer to the link state acknowledgements (LSA) retransmission list. Inactivity timer ID. Hello timer ID. Database retransmission timer ID. LSR retransmission timer ID. Inactivity timeout value, in milliseconds. When this timeout expires, the adjacency with the neighbor switch is broken and new paths are computed to all possible destination switches in the fabric. Hello timeout value, in milliseconds. When this timeout expires, a Hello frame is sent to the neighbor switch through this port. Retransmission timeout value, in milliseconds. It is used to transmit topology information to the neighbor switch. If no acknowledgement is received within this value, the frame is retransmitted. Total number of commands accepted from the neighbor switch. Number includes Hellos, Link State Updates (LSUs), and LSAs. Number of invalid commands received from the neighbor switch. Usually commands with an FSPF version number higher than the one running on the local switch. Number of Hello frames received from the neighbor switch. Number of invalid Hello frames (Hello frames with invalid parameters) received from the neighbor switch. Brocade Fabric OS Command Reference 415 53-1004112-02