Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 201

diagRetry diagRetry Sets or displays diagnostic retry mode. Synopsis diagretry [mode | -show] Description Use this command to enable retry mode if the mode value is nonzero and to disable the retry mode if the mode value is 0. The mode value is saved in nonvolatile memory until you change the mode. Changes made by this command do not require a reboot to take effect. Retry mode modifies the behavior of the diagnostic test methods, power-on self-test (POST), and burn-in scripts. The exact behavior depends on the tests and scripts that are run. Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric OS Commands" and "Command Availability" for details. Operands This command has the following optional operands: mode Specify 1 to enable retry mode. Specify 0 to disable the feature. -show Displays the current mode setting. The --show option is equivalent to using the command without operands. Examples To view and modify the current retry mode value: switch:admin> diagretry -show Diagnostic Retry Mode is currently enabled. switch:admin> diagretry 0 Config update Succeeded Diagnostic Retry Mode is now disabled. switch:admin> diagretry 1 Config update Succeeded Diagnostic Retry Mode is now enabled. SEE ALSO None Brocade Fabric OS Command Reference 177 53-1004112-02