Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 845

portPerfShow -t time_interval -tx -rx -tx -rx -x hex1 [-hex2] Specifies the interval, in seconds, between each sample. The default interval is one second. If no interval is specified, the default is used. To run this command one time only, specify an interval of zero. Displays the transmitter throughput. Displays the receiver throughput. Displays the transmitter and receiver throughput. Accepts an index number or a range of index numbers within the same slot in hexadecimal format as input and displays the output in slot and port number format for chassis and index number format on switches. Examples To display performance information for all ports at a one second (default) interval: switch:user> portperfshow 0 123456789 10 11 12 13 14 15 630.4m 0 0 0 0 0 0 0 0 0 630.4m 0 0 0 0 0 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 0 210.1m 840.5m 210.1m 0 0 0 0 0 0 0 0 0 0 0 0 32 33 34 35 36 37 38 39 Total 0 0 0 0 0 0 0 0 2.5g 0 123456789 10 11 12 13 14 15 630.4m 0 0 0 0 0 0 0 0 0 630.4m 0 0 0 0 0 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 0 210.1m 840.6m 210.1m 0 0 0 0 0 0 0 0 0 0 0 0 32 33 34 35 36 37 38 39 Total 0 0 0 0 0 0 0 0 2.5g (output stopped) To display port performance for all ports with an interval of 5 seconds: switch:user> portperfshow -t 5 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 630.4m 0 0 0 0 0 0 0 0 112 630.4m 0 0 0 0 0 Brocade Fabric OS Command Reference 821 53-1004112-02