Dell Brocade G620 Brocade 8.0.1 Fabric OS Command Reference - Page 655
Flags: U=Usable G=Gateway H=Host C=CreatedInterface, S=Static L=LinkLayer X=Crossport
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 655 highlights
portCfg ge0 2000::1:250 / 128 * U H L ge0 2010:: / 64 2000::1:250 U G S Flags: U=Usable G=Gateway H=Host C=Created(Interface) S=Static L=LinkLayer X=Crossport To create an IP route for a failover crossport on a Brocade FX8-24: 1. Configure the iproute for the local XGE port (xge0). switch:admin> portcfg iproute 8/xge0 create 2.2.2.0 \ netmask 255.255.255.0 192.168.11.250 Operation Succeeded 2. Configure the interface for the non-local XGE port (xge1). switch:admin> portcfg ipif 8/xge1 create 1.1.1.0 \ netmask 255.255.255.0 192.168.11.250 -x Operation Succeeded 3. The IP route will be available for circuits on VE ports 22-31. The output from portshow iproute for the same route shows the crossport tag. switch:admin> portshow iproute 8/xge0 Port IP Address / Pfx Gateway Flags 8/xge0 192.168.0.0 / 24 * U C 8/xge0 192.168.0.111 / 32 * U H L 8/xge0 192.168.1.0 / 24 * U C X 8/xge0 192.168.1.111 / 32 * U H L X Flags: U=Usable G=Gateway H=Host C=Created(Interface) S=Static L=LinkLayer X=Crossport To delete the crossport IP route: switch:admin> portcfg iproute 8/xge1 delete \ 1.1.1.0 netmask 255.255.255.0 -x Operation Succeeded To delete a static IP route using an IPv4 address: switch:admin> portcfg iproute ge0 delete \ 172.16.0.0 netmask 255.255.0.0 Operation Succeeded To create a network-wide permanent VLAN tag entry with a VLAN ID of 200 and an L2 CoS value of 5 (no destination address): switch:admin> portcfg vlantag ge2 add \ 192.168.2.10 200 5 Operation Succeeded Brocade Fabric OS Command Reference 631 53-1004112-02
![](/manual_guide/products/dell-brocade-g620-brocade-801-fabric-os-command-reference-c7958e0/655.png)